Floor Standing Lifting StationsSanicubic 1 GR HP
Ambiance visual of a Sanicubic 1 GR HP S, single-phase, lifting station for grey/waste water in the basement.

Sanicubic 1 GR HP

Sanicubic 1 GR HP is a lifting station recommended for a detached house or a small commercial premises.
Installation without disbursement
Accessibility in case of maintenance
Pro XK2 stainless steel grinder technology
Max. permissible T° of pumped liquid up to 90 °C (5 min)
2 low side entrances
Control box with audible and visual alarm
Remote wired alarm box included: for reporting the alarm signal
Find out more

Product details

Sanicubic 1 GR HP is designed for the removal of wastewater from individual houses, apartments or small commercial structures.

The pump is equipped with the Pro X K2 dilaceration system allowing the evacuation of effluents through a small diameter pipe (50 mm ext.).

These 2 low inputs allow great flexibility in the installation.

The station comes standard with a control box incorporating an audible and visual alarm and a remote wired alarm box.

Product code: 30016

Please note that this Sanicubic will be replaced with a new ‘L’ version by 1st May 2026.

The new version will be exactly the same in terms of design and performance, however the wired alarm will no longer be provided as standard. The wired alarm will still be available to purchase separately.
Technical specification

Sanicubic 1 GR HP

Materials

  • Shaft
  • Tank
  • Pump housing
  • Seal
  • Motor housing
  • Impeller
  • Shaft
  • Shaft
  • Tank
  • Tank
  • Pump housing
  • Pump housing
  • Seal
  • Seal
  • Motor housing
  • Motor housing
  • Impeller
  • Impeller
  • Shaft
  • Stainless steel
  • Tank
  • PE HD
  • Pump housing
  • PA 12 GF
  • Seal
  • NBR
  • Motor housing
  • Aluminium
  • Impeller
  • PP GF

Electrical features

  • Number of motor(s)
  • Socket included
  • Voltage (V)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • IP rating
  • Electrical class
  • Mode of operation
  • Current
  • Length of cable-control box (m)
  • Number of pumps
  • Type of control box
  • Length (m)
  • Section (mm²)
  • Type of cable
  • Number of motor(s)
  • Number of motor(s)
  • Socket included
  • Socket included
  • Voltage (V)
  • Voltage (V)
  • Frequency (Hz)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • Maximum current (A)
  • IP rating
  • IP rating
  • Electrical class
  • Electrical class
  • Mode of operation
  • Mode of operation
  • Current
  • Current
  • Length of cable-control box (m)
  • Length of cable-control box (m)
  • Number of pumps
  • Number of pumps
  • Type of control box
  • Type of control box
  • Length (m)
  • Length (m)
  • Section (mm²)
  • Section (mm²)
  • Type of cable
  • Type of cable
  • Number of motor(s)
  • Single motor
  • Socket included
  • no
  • Voltage (V)
  • 220-240
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 2500
  • Power output P2 (W)
  • 2000
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 16
  • IP rating
  • IPX8
  • Electrical class
  • I
  • Mode of operation
  • S3 25 %
  • Current
  • Single-phase
  • Length of cable-control box (m)
  • 4
  • Number of pumps
  • 1
  • Type of control box
  • Classic
  • Length (m)
  • 1,5
  • Section (mm²)
  • 1.5
  • Type of cable
  • H07 RN-F 3G

Hydraulic

  • Max. Head (m)
  • Max. flow rate (m³/h)
  • Number of inlets
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of activation
  • Max. Head (m)
  • Max. Head (m)
  • Max. flow rate (m³/h)
  • Max. flow rate (m³/h)
  • Number of inlets
  • Number of inlets
  • External inlet diameter (mm)
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Total volume (L)
  • Useable volume (L)
  • Useable volume (L)
  • ON Level (mm)
  • ON Level (mm)
  • OFF level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of impeller
  • Type of activation
  • Type of activation
  • Max. Head (m)
  • 18
  • Max. flow rate (m³/h)
  • 19
  • Number of inlets
  • 2
  • External inlet diameter (mm)
  • 100
  • Discharge diameter ext. (mm)
  • 50
  • Ext. ventilation diameter (mm)
  • 50
  • Total volume (L)
  • 26
  • Useable volume (L)
  • 12
  • ON Level (mm)
  • 155
  • OFF level (mm)
  • 60
  • Alarm level (mm)
  • 225
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 90°C
  • Type of impeller
  • Pro X K2 grinder
  • Type of activation
  • pneumatic

Logistics

  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • 24

General description

  • EAN code
  • EAN code
  • EAN code
  • EAN code
  • 3308815089614
Quality

Buy with confidence

  • Performance and Reliability

    Technologies and materials that ensure efficiency and longevity.

  • Made in France

    Most of our products are manufactured in France to the highest quality standards.

  • Warranty Extension

    Saniflo products can be registered for a warranty of up to 5 years.

  • Extensive support

    A network of Approved Service Engineers.

  • Experts Since 1958

    Creator of the Saniflo macerating toilet.