Underground Lifting Stations

Sanifos 280 Black water

Ambiance visual of a Sanifos 280 1 GR S, underground lifting station, grey/black water in a garden.

Sanifos 280 Black water

An automatic lifting station that can be used for pumping residential or industrial waste water when the sewer is at too high level for natural gravity drainage.
Designed for drainage of a single dwelling incorporating WC, bathroom, kitchen, utility room
Powerful automatic motor with quiet operation, grinder and vortex versions available
Easy handling for installation below ground level
Pumps vertically 14 m
Find out more

Product details

The Sanifos 280 is an automatic lifting station for residential or industrial waste. It can take waste from a toilet, basin, bath, shower, bidet, washing machine, dishwasher and sink. It is designed to take waste from a single residential dwelling including bathroom, kitchen, utility room etc. It comes in two versions the first comes with a single macerator pump with float activation method it has robust cutting blades to prevent clogging and has a powerful automatic motor with quiet operation. The second version is a vortex version that comes with a large bore vortex pump which can pump away waste without the need to macerate. The Sanifos 280 has a 280 litre storage tank with a float switch and offers easy handling for installation below ground level. The Sanifos 280 has three drilling zones to allow access to the tank where you need it for your project and it discharges through 40 or 50 mm pipework. Sanifos 280 comes with a tank with pre-assembled hydraulic system, isolation valve and non-return valve it also has an alarm box. A 40 cm extension is available as an accessory for bigger projects and the Sanifos comes with a 2-year warranty.

Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanifos offers you peace of mind and with the backup from our service team there's never been a better time to install a Saniflo.

Product codes: 40001, 40002
Technical specification

Sanifos 280 Black water

  • Version
  • Version
  • Version
  • Version
  • Sanifos 280 1GR S
  • Version
  • Sanifos 280 1VX S

Materials

  • Shaft
  • Tank
  • Pipework
  • Pump housing
  • Waterproofing
  • Foot
  • Motor housing
  • Impeller
  • Shaft
  • Shaft
  • Tank
  • Tank
  • Pipework
  • Pipework
  • Pump housing
  • Pump housing
  • Waterproofing
  • Waterproofing
  • Foot
  • Foot
  • Motor housing
  • Motor housing
  • Impeller
  • Impeller
  • Shaft
  • Stainless steel
  • Tank
  • PE HD
  • Pipework
  • PVC
  • Pump housing
  • Copper
  • Waterproofing
  • NBR
  • Foot
  • PA 12 GF
  • Motor housing
  • PA 6 GF
  • Impeller
  • Copper
  • Shaft
  • Stainless steel
  • Tank
  • PE HD
  • Pipework
  • PVC
  • Pump housing
  • Copper
  • Waterproofing
  • NBR
  • Foot
  • PA 12 GF
  • Motor housing
  • PA 6 GF
  • Impeller
  • Steel

Electrical features

  • Socket included
  • Voltage (V)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • IP Rating
  • Electrical class
  • Motor insulation class
  • Current
  • Number of pumps
  • Length (m)
  • Section (mm²)
  • Type of cable
  • Socket included
  • Socket included
  • Voltage (V)
  • Voltage (V)
  • Frequency (Hz)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • Maximum current (A)
  • IP Rating
  • IP Rating
  • Electrical class
  • Electrical class
  • Motor insulation class
  • Motor insulation class
  • Current
  • Current
  • Number of pumps
  • Number of pumps
  • Length (m)
  • Length (m)
  • Section (mm²)
  • Section (mm²)
  • Type of cable
  • Type of cable
  • Socket included
  • no
  • Voltage (V)
  • 230
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 1500
  • Power output P2 (W)
  • 1050
  • Revolution per minute (RPM)
  • 2900
  • Maximum current (A)
  • 6
  • IP Rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Single-phase
  • Number of pumps
  • 1
  • Length (m)
  • 10
  • Section (mm²)
  • 1.5
  • Type of cable
  • H07 RN-F 3G
  • Socket included
  • no
  • Voltage (V)
  • 230
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 1500
  • Power output P2 (W)
  • 1050
  • Revolution per minute (RPM)
  • 2900
  • Maximum current (A)
  • 6
  • IP Rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Single-phase
  • Number of pumps
  • 1
  • Length (m)
  • 10
  • Section (mm²)
  • 1.5
  • Type of cable
  • H07 RN-F 3G

Hydraulic

  • Discharge diameter
  • Max. Head (Q0) (m)
  • Max. flow rate (m³/h)
  • Number of inlets
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Medium (°C)
  • Min. incoming water connection (mm)
  • Max. incoming water connection (mm)
  • Max. incoming water connection if option is available (mm)
  • Type of impeller
  • Type of activation
  • Discharge diameter
  • Discharge diameter
  • Max. Head (Q0) (m)
  • Max. Head (Q0) (m)
  • Max. flow rate (m³/h)
  • Max. flow rate (m³/h)
  • Number of inlets
  • Number of inlets
  • External inlet diameter (mm)
  • External inlet diameter (mm)
  • Discharge diameter ext. (mm)
  • Discharge diameter ext. (mm)
  • Ext. ventilation diameter (mm)
  • Ext. ventilation diameter (mm)
  • Total volume (L)
  • Total volume (L)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Medium (°C)
  • Medium (°C)
  • Min. incoming water connection (mm)
  • Min. incoming water connection (mm)
  • Max. incoming water connection (mm)
  • Max. incoming water connection (mm)
  • Max. incoming water connection if option is available (mm)
  • Max. incoming water connection if option is available (mm)
  • Type of impeller
  • Type of impeller
  • Type of activation
  • Type of activation
  • Discharge diameter
  • 63
  • Max. Head (Q0) (m)
  • 14
  • Max. flow rate (m³/h)
  • 15
  • Number of inlets
  • 2
  • External inlet diameter (mm)
  • 50, 100
  • Discharge diameter ext. (mm)
  • 50
  • Ext. ventilation diameter (mm)
  • 75
  • Total volume (L)
  • 280
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 70°C
  • Medium (°C)
  • 35
  • Min. incoming water connection (mm)
  • 180
  • Max. incoming water connection (mm)
  • 585
  • Max. incoming water connection if option is available (mm)
  • 885
  • Type of impeller
  • Pro X K2 grinder
  • Type of activation
  • manual
  • Discharge diameter
  • 63
  • Max. Head (Q0) (m)
  • 13
  • Max. flow rate (m³/h)
  • 26
  • Number of inlets
  • 2
  • External inlet diameter (mm)
  • 50, 100
  • Discharge diameter ext. (mm)
  • 63
  • Ext. ventilation diameter (mm)
  • 75
  • Total volume (L)
  • 280
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 70°C
  • Medium (°C)
  • -
  • Min. incoming water connection (mm)
  • 180
  • Max. incoming water connection (mm)
  • 585
  • Max. incoming water connection if option is available (mm)
  • 885
  • Type of impeller
  • vortex
  • Type of activation
  • manual

Logistics

  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • 55
  • Gross weight (kg)
  • 55

General description

  • EAN code
  • EAN code
  • EAN code
  • EAN code
  • 3308815083117
  • EAN code
  • 3308815081304
Quality

Buy with confidence

  • Performance and Reliability

    Technologies and materials that ensure efficiency and longevity.

  • Made in France

    Most of our products are manufactured in France to the highest quality standards.

  • Warranty Extension

    Saniflo products can be registered for a warranty of up to 5 years.

  • Extensive support

    A network of Approved Service Engineers.

  • Experts Since 1958

    Creator of the Saniflo macerating toilet.